Glossary


Browse the glossary using this index

Special | A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | ALL

Page:  1  2  (Next)
  ALL

M

Machine sanding

Machine sanding is a faster sanding process using specialized machines to hold the sandpaper and work the surface. This method is good for large areas, production work, and a more consistent finish


Magazine

The magazine is the spring loaded chamber of a nailer for holding a supply of collated nails to be fed automatically into the gun



Masker

A masker is a hand tool that loads and dispenses tape and masking plastic or paper rolls quickly for production prep work



Masking

Masking is a prep process where tape and plastic or paper sheets are used to protect areas that do not receive paint



Masking tape

Masking tape is a roll of adhesive paper or plastic used to prevent paint from being applied to certain areas


Matte

Matte is a term to describe a paint sheen with a no gloss finish. Also called “flat



Miter

A miter is an angle cut made with the broad face of the board lying flat on the base of a miter saw and the vertical blade pivoted left or right to form an angle



Miter angle gauge

A miter angle gauge indicates the angle a miter saw is set to. Usually from 0 to up to 45 or more degrees.



Miter gauge

A miter gauge is a saw feature that allows for crosscuts in the material on a saw made for rip cuts



Miter latch

A miter latch is a catch that automatically clicks into predetermined angles on a miter saw, like 0 and 45 degrees.




Page:  1  2  (Next)
  ALL